Our Work
Mold remediation, air quality testing, water damage, attics, basements & crawlspaces — every project handled by a Certified Indoor Environmentalist.
Featured Project
Mold Remediation
Two-technician containment and source removal in an attic with active mold growth. HEPA-filtered work area, sealed disposal, and post-clearance air verification.
Discuss a Similar ProjectMore Recent Work
Scroll →
Project Archive
Mold RemediationTwo-technician containment and source removal in an attic with active mold growth. HEPA-filtered work area, sealed disposal, and post-clearance air verification.
Mold RemediationZippered containment barrier with negative-pressure air scrubber isolated the affected bedroom while the rest of the home stayed livable during remediation.
Water DamageLayflat ducting and air movers deployed after a moisture event in a finished mudroom. Structural drying verified with moisture mapping before reoccupancy.
Water DamageCabinet base removal, anti-microbial treatment, and commercial dehumidifiers brought a flooded kitchen back to dry standard before reconstruction.
Air Quality TestingProtimeter moisture mapping plus spore-trap air sampling on a 30th-floor condo. Lab-verified clearance delivered to client within 72 hours.
Air Quality TestingIn-duct UV-C system installed at the air handler to neutralize biological contaminants and protect coil hygiene year-round.
Basement & CrawlspaceDedicated whole-basement dehumidifier paired with the existing HVAC to hold humidity below 55% — eliminating the conditions mold needs to grow.
Basement & CrawlspaceWhole-basement source removal followed by sealed framing and a stand-alone dehumidifier — ready for the homeowner to finish without future risk.
Basement & CrawlspaceFull vapor-barrier encapsulation with a conditioned-space dehumidifier — converting a damp crawlspace into a dry, controlled environment.
AtticClean, dry attic after full remediation and decking treatment. Final visual + air clearance signed off by our Certified Indoor Environmentalist.
Basement & CrawlspacePre-occupancy drying of a poured-concrete foundation level with overhead MEP. Air movers and a containment plan kept moisture out of the framing trades' way.
Mold RemediationFloor-to-ceiling 6-mil poly containment with negative-air machine isolated the entire basement during source removal — zero cross-contamination upstairs.
Water DamageDrop-ceiling tile removal, subfloor demo, and multi-unit drying after a sustained water loss in a finished basement. Moisture-mapped to dry standard.
CommercialAbove-ceiling moisture and mold inspection in an active commercial space. Borescope and direct visual assessment with zero disruption to operations.
CommercialTripod hygrometer logging with handheld RH/temp verification across a 50,000+ sq-ft warehouse — documented standing-water sources and elevated humidity zones.
Water DamageSame-day mobilization for a kitchen dishwasher leak — LGR dehumidifier and dual axial air movers under containment dried subfloor before damage spread.
AtticRoof sheathing and rafters fully treated and encapsulated after source removal — a clean, sealed surface that resists future mold growth.
AtticDocumented compressed insulation and condensation around flex ducting — recommendations issued to prevent future moisture intrusion in the conditioned envelope.
Mold RemediationFull-PPE airless application of EPA-registered antimicrobial across a brick cellar — penetrates porous masonry where surface cleaning alone fails.
AtticHEPA air scrubber positioned at an attic air handler during remediation around the unit's plenum and supply trunks — kept spores out of the duct system.
Water DamageOpened a utility chase behind a closet to expose copper supply lines and assess concealed moisture damage at the subfloor and framing.
CommercialFull-floor commercial build-out with poly containment and HEPA air scrubbers running during framing and drywall to maintain IAQ for adjacent occupied space.
Basement & CrawlspaceIndustrial axial fan deployed beneath insulated duct runs to accelerate drying after a sub-basement water intrusion event.
Water DamageLGR dehumidifier staged inside an attached garage to pull moisture out of exposed sheathing and framing after a roof leak.
Air Quality TestingPin-probe moisture meter used to map elevated readings across a ceiling, isolating the wet zone before any drywall removal.
Air Quality TestingParticulate and chloramine-aware air sampling at a luxury indoor pool — humidity, VOC and bioaerosol baseline for the natatorium envelope.
Mold RemediationRespirator-equipped techs deep-cleaning a wall-mounted mini-split head with full wall containment to capture biofilm and microbial growth from the coil and blower wheel.
Mold RemediationPinless moisture meter reading at 777 relative on a wall with visible surface mold — confirmed ongoing moisture source before scoping remediation.
Mold RemediationHBH crew performing full HEPA detail cleaning of a child's bedroom — air scrubber and HEPA vacuum running while every surface is wiped to post-remediation standard.
Air Quality TestingFLIR thermal camera scan at a door threshold revealing a cold, wet zone — non-destructive confirmation of water intrusion before opening the wall.
Water DamageTwo-foot flood cut exposing studs after a basement water loss — air mover staged to dry framing and concrete before insulation and drywall go back.
Water DamageDrizAir 1400 dehumidifier and HEPA 550 air scrubber deployed in a furnished Upper East Side apartment after a supply line failure — discreet, fast structural drying.
CommercialFloor-to-ceiling poly containment in a NYC loft with negative-air HEPA scrubber and lay-flat ducting venting safely through a window during remediation.
Mold RemediationHBH technician inside full containment performing controlled demolition of a contaminated wall cavity with a reciprocating saw and HEPA capture.
Water DamageHBH tech opening a water-damaged ceiling to expose joists and saturated insulation — full poly containment kept the rest of the home clean.
Mold RemediationFull-PPE airless application of EPA-registered antimicrobial across exposed ceiling joists and subfloor after gross removal of moldy drywall.
Water DamageEntire ceiling opened to the joist bays with two LGR units running on protected flooring — moisture intrusion source addressed before reconstruction.
Start Your Project
Every project starts with a conversation. Tell us what you're dealing with.
Request a Consultation